AHHH…my eyes! Seriously, whatever floats your boat, but that rear brake cable is awfully conspicuous. Unfortunately, the only solutions (other than loosing the rear brake) are routing inside your top tube or matching cable housing to the exact same red as the frame.
idk, there are much worse stock bikes fixies out there. For example, Retrospec only give you loose bearing hubs which are factory adjusted so tight, they’ll have you grinding down the road straight from the shop…built-in fail. CREATE are about $150 more, but I’m pretty sure things are more exp in europe than US right now. As far as the wheels, I’m using brakes on non-machined rims and it’s working fine.
Fixed Gear bikes - Showcase your beloved Fixed Gear or Single Speed bike to the world and find out what the world thinks. Browse other people’s bikes and pass judgment on them like the fixie connoisseur you know you are.
8 Comments Received
October 14th, 2011 @4:49 pm
hideous
October 14th, 2011 @7:51 pm
AHHH…my eyes! Seriously, whatever floats your boat, but that rear brake cable is awfully conspicuous. Unfortunately, the only solutions (other than loosing the rear brake) are routing inside your top tube or matching cable housing to the exact same red as the frame.
October 14th, 2011 @11:14 pm
why have a back brake with an unmachined back wheel? if you are going to have it at least put it to a use
October 15th, 2011 @2:09 am
What do you expect from a bike bought at a hardware shop?
October 15th, 2011 @8:23 am
This is just a stock create bike. Worst piece of cheap heap of metal you can find. To the chop shop with it and start again.
October 15th, 2011 @8:30 am
colors are horrid,fail.
October 15th, 2011 @12:34 pm
idk, there are much worse stock bikes fixies out there. For example, Retrospec only give you loose bearing hubs which are factory adjusted so tight, they’ll have you grinding down the road straight from the shop…built-in fail. CREATE are about $150 more, but I’m pretty sure things are more exp in europe than US right now. As far as the wheels, I’m using brakes on non-machined rims and it’s working fine.
October 15th, 2011 @5:08 pm
My eyes, they burn. The goggles, they do nothing!
Leave A Reply